https://nova.newcastle.edu.au/vital/access/ /manager/Index en-au 5 https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:29678 alt-4,9-bis(2-hexyldecyl)-4,9-dihydrodithieno[3,2-c:3′,2′-h][1,5]naphthyridine-5,10-dione). Heterogeneous energy transfer is found to be crucial in the exciton dissociation process of both binary and ternary organic semiconductor systems. Circumstances favoring energy transfer across interfaces allow relaxation of the electronic energy level requirements, meaning that a cascade structure is not required for efficient ternary organic solar cells. We explain how energy transfer can be exploited to eliminate additional energy losses in ternary bulk heterojunction solar cells, thus increasing their open-circuit voltage without loss in short-circuit current. In particular, we show that it is important that the DIBSq is located at the electron donor–acceptor interface; otherwise charge carriers will be trapped in the DIBSq domain or excitons in the DIBSq domains will not be able to dissociate efficiently at an interface. KMC modeling shows that only small amounts of DIBSq (<5% by weight) are needed to achieve substantial performance improvements due to long-range energy transfer.]]> Sat 24 Mar 2018 07:32:21 AEDT ]]> https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:28349 g) and amorphous nature, compared to the commonly applied semicrystalline polymer poly(3-hexylthiophene) (P3HT). This study reports the optimisation of TQ1:PC₇₁BM (phenyl C₇₁ butyric acid methyl ester) NP-OPV device performance by the application of mild thermal annealing treatments in the range of the T_g (sub-T_g and post-T_g), both in the active layer drying stage and post-cathode deposition annealing stage of device fabrication, and an in-depth study of the effect of these treatments on nanoparticle film morphology. In addition, we report a type of morphological evolution in nanoparticle films for OPV active layers that has not previously been observed, that of PC₇₁BM nano-pathway formation between dispersed PC₇₁BM-rich nanoparticle cores, which have the benefit of making the bulk film more conducive to charge percolation and extraction.]]> Sat 24 Mar 2018 07:25:10 AEDT ]]> https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:51632 Mon 29 Jan 2024 18:27:57 AEDT ]]> https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:48733 Mon 29 Jan 2024 18:04:30 AEDT ]]> https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:44553 Mon 29 Jan 2024 17:56:34 AEDT ]]> https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:38868 Fri 25 Mar 2022 11:12:33 AEDT ]]> https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:35933 alt-5,10-bis((2-hexyldecyl)oxy)dithieno[3,2-c:3',2'-h][1,5]naphthyridine-2,7-diyl] (PTNT) and fullerene blend utilizing chloroform as well as a non-chlorinated and environmentally benign solvent, o-xylene, as the miniemulsion dispersed phase solvent. The nanoparticles (NPs) in the solid-state film were found to coalesce and offered a smooth surface topography upon thermal annealing. Organic photovoltaics (OPVs) with photoactive layer processed from the nanoparticle dispersions prepared using chloroform as the miniemulsion dispersed phase solvent were found to have a power conversion efficiency (PCE) of 1.04%, which increased to 1.65% for devices utilizing NPs prepared from o-xylene. Physical, thermal and optical properties of NPs prepared using both chloroform and o-xylene were systematically studied using dynamic mechanical thermal analysis (DMTA) and photoluminescence (PL) spectroscopy and correlated to their photovoltaic properties. The PL results indicate different morphology of NPs in the solid state were achieved by varying miniemulsion dispersed phase solvent.]]> Fri 19 Jun 2020 12:14:42 AEST ]]>